Alumilite Clear is a crystal clear resin that is easy to use and great for a wide variety of clear casting applications. It is a favourite with woodturners!
Alumilite Clear produces a extra strong, crystal clear casting which polishes to a high shine beautifully. It can be dyed or pigmented and produces an optically clear casting. This resin has excellent cosmetic detail and is easy to use. It is highly recommended for encapsulating and turning applications as it is extremely strong and durable, and it turns beautifully without chipping or cracking. Turned blanks can be easily polished to a high gloss. It has a 7 min open time. Can be sanded, wet sanded, and/or buffed.
Alumilite Clear must be mixed 1:1 by weight. Off-ratio mixing may produce hazy or frosted parts. B side may thicken and need to be warmed before use.
Recommended for experienced resin users. Pressure casting is required.
For high quality metal effects, use the Alumilite Metal Powders, which comes in most metals; pearlescent, bronze, gun metal, gold, copper and silver. For a glow in the dark effect, use the Phosphorescent Powder!
** For more detailed instructions and loads more information about using this product, please read Alumilite's Technical Safety Data sheet here.
Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.
Mix Ratio: 1:1 by weight (off-ratio mixing may produce hazy or frosted parts. B side may thicken and need to be warmed before use)
De-mould Time: 45-60 minutes
Temperature Resistance: 60C (140F)
**Please note: The shelf life of Alumilite Clear is 3 months in an unopened container and we highly recommend using it within it's shelf life to maintain optimum clarity and stability**
TOP TIP FOR STORAGE: Keep the caps of each resin bottle on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible.
Click here for Woodturning Instructions
Resin was ok but I should have ordered the 'slow' grade. But, the items turned out very good indeed but had to work very quickly!!
I bought some Alumilte resin and used it for the first time, and I must say it is really good gear. Easy to mix and pour and has great results. Top rate.