Alumilite CLEAR Resin - Large

(No reviews yet) Write a Review

This product has a fixed shipping fee of £6.95 to Mainland UK. Call us for a quote if your delivery address is outside Mainland UK (Ireland, Scottish Highlands, Channel Islands, Isle of Man, Isle of Wight is counted as "outside Mainland UK" according to our couriers). 

Alumilite Clear is a crystal clear resin that is easy to use and great for a wide variety of clear casting applications. It is a favourite with woodturners!

Alumilite Clear produces an extra strong, crystal clear casting which polishes to a high shine beautifully. It can be dyed or pigmented and produces an optically clear casting. This resin has excellent cosmetic detail and is easy to use. It is highly recommended for encapsulating and turning applications as it is extremely strong and durable, and it turns beautifully without chipping or cracking. Turned blanks can be easily polished to a high gloss. It has a 7 min open time. Can be sanded, wet sanded, and/or buffed.

Alumilite Clear must be mixed 1:1 by weight. Off-ratio mixing may produce hazy or frosted parts. B side may thicken and need to be warmed before use. 

Recommended for industrial use only. Pressure casting is highly recommended to achieve 100% bubble free castings, but minimal bubbles can be achieved by slowly mixing and pouring the resin.

Don't use water based dyes or colours with this resin. Our Alumilite Dyes are ideal (which come in a huge range of colours including fluorescent neon colours!), as well as any dry colours, like Pearl Ex.

For high quality metal effects, use the Alumilite Metal Powders, which comes in most metals you might want like; pearlescent, bronze, gold, copper and silver. For a glow in the dark effect, use the Phosphorescent Powder!

** For more detailed instructions and loads more information about using this product, please read Alumilite's Technical Safety Data sheet here. 

Approximately 7,600ml (16lb) - this resin is also available in a smaller sizes.

Mix Ratio: 1:1 by weight
De-mould Time: 45-60 minutes
Temperature Resistance: 60C (140F)

**Please note: The shelf life of Alumilite Clear is 3 months in an unopened container and we highly recommend using it within it's shelf life to maintain optimum clarity and stability** 

TOP TIP FOR STORAGE: Keep the caps of each resin bottle on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible. 

Click here for Woodturning Instructions

Click here to read the Technical Data Sheet prior to use