Alumilite Clear SLOW Urethane Resin - 2lbs / 907g

(Inc. VAT)
(Ex. VAT)
(4 reviews) Write a Review
Bulk Pricing:
Buy in bulk and save

Alumilite Clear (Slow) is a crystal clear resin that is easy to use and great for a wide variety of clear casting applications. It is a favourite with woodturners!

Alumilite Clear produces an extra strong, crystal clear casting which polishes to a high shine beautifully. It can be dyed or pigmented and produces an optically clear casting. This resin has excellent cosmetic detail and is easy to use. It is highly recommended for encapsulating and turning applications as it is extremely strong and durable, and it turns beautifully without chipping or cracking. Turned blanks can be easily polished to a high gloss. It has a 12 min open time. Can be sanded, wet sanded, and/or buffed.

Alumilite Clear must be mixed 1:1 by weight. Off-ratio mixing may produce hazy or frosted parts. B side may thicken and need to be warmed before use. 

Recommended for experienced resin users. Pressure casting is required. 

Don't use water based dyes or colours with this resin. Our Alumilite Dyes are ideal (which come in a huge range of colours, including fluorescent neon colours!), as well as any dry colours. For gorgeous shimmers and high quality metal effects, use Mica Powder Pigments or the Alumilite Metal Powders. For a glow in the dark effect, use the Phosphorescent Powder!

** For more detailed instructions and loads more information about using this product, please read Alumilite's Technical Safety Data sheet here. 

Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.

2lbs / 907g - this resin is also available in 8lb and 16lb.

  • Mix Ratio: 1:1 by weight (off-ratio mixing may produce hazy or frosted parts. B side may thicken and need to be warmed before use)
  • De-mould Time: 2-4 hours minimum
  • Temperature Resistance: 60C (140F)

**Please note: The shelf life of Alumilite Clear is 3 months in an unopened container and we highly recommend using it within it's shelf life to maintain optimum clarity and stability** 

TOP TIP FOR STORAGE: Keep the caps of each resin bottle on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible. 

Click here for Woodturning Instructions

Click here for an SDS sheet for this product.

Click here for a Technical Data sheet for this product.


4 Reviews

  • 5
    Alumilite C lear Slow

    Posted by Bruce Beaney on 29th Jun 2020

    Wouldn't use anything else - having tried tried a few! Only had one failure with this and that was down to pilot error! Great product.

  • 5
    Best resin

    Posted by Lorenz on 13th Jun 2020

    This is the best resin i used in my life so far. very fast demolding time, easy mix ratio by weight. clear like glass, easy to sand and finish. i highly recommend this product. no other resin cures so fast and still is clear (i tried few 24 or more hours demolding resins, less wait but same or even better results is worth the price).

  • 5
    Works like promised

    Posted by Lau Lauridsen on 10th Jun 2020

    Perfect to turn

  • 5
    Great Product

    Posted by Bruce Beaney on 18th Sep 2019

    If you follow the instructions, use a pressure pot and do a bit of research regarding casting then you will not fail to be impressed. Great product.