Royal Palm Resin (Original Formula) is an easy to use epoxy resin used for casting, encapsulation, coating and lamination. The original formula is the consistency of thick syrup or honey. Great for creating unusual effects when adding colour.
A clear casting resin which works well for both thin coats and deeper casts. Royal Palm Epoxy Resin is a fantastic product which allows you to create all sorts of projects; from coating photos and drawings, paintings and paper crafts, and filling bottle tops, to casting blanks, large bangles and paper weights. A great resin for pen blanks, wood turning, resin crafts and resin jewellery making.
- Easy to use - ideal for beginners to resin crafts, jewellery making, pen blanks and turning. Just mix equal amounts of the two parts.
- Does both thick layers and thin coatings - it is rare to find a resin which does both well!
- Casts into a multitude of mould types.
- Nice long work time, 50-60 minutes.
- Ready to remove out of the mould in about 24 hours.
This Royal Palm Epoxy Resin (Original) mixes in equal ratios (1:1 by volume) so very easy to measure up equal amounts of both parts.
Works perfectly with our resin moulds, with no release agent needed (however, release agents are a good way to extend the life of your mould). Can also be cast into plaster, aluminium, latex and urethane moulds if a mould making release (like Vaseline) is used.
Mix ratio: 1:1 by volume
Work time: up to 1hr (dependent on temperature)
Demould time: 24 hours.
Size: approx 950ml (32 fl. oz.) - The kit comes with 473ml (16 fl.oz) of part A resin and 473ml (16 fl.oz) of part B hardener.
TOP TIP FOR STORAGE: Keep the caps closed tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible.
Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS below and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.
GOOD NEWS - THIS RESIN CAN ALSO BE SHIPPED TO OUR EUROPEAN CUSTOMERS!