Set of 4 Alumilite Silicone Measuring Cups, great for mixing epoxy resin!

These measuring cups are essential for resin crafters, they are fully reusable which makes them an eco-friendly alternative to single use cups!

The larger 8oz cup includes handy measurements in ml and ounces to make your mixing quick and easy!  The smaller cup includes measurements in ml. Both size cups are transparent, which makes the numbers readable from the inside and outside-meaning no more bending down to make sure your resin's level. There is also a pouring spout which makes pouring hassle-free!

When you work with resin, exact measurements are really important, to ensure it sets properly. Use these cups to measure up exact amounts and to mix the resin. With the graduated printed scales, it is easy to get the right measurements.

Keep one "A" cup, one "B" cup, and one cup for mixing the two. If you're doing a large casting session you can then keep reusing the A and B cup for ages.

Depending on which resin you use, you can often clean out the cups for reusing, and you should be able to get quite a few pours out of each cup:

• Whilst the resin is still wet you can spray the cup with cooking oil spray, and wipe it clean with a paper towel. Then wipe of the residue with denatured alcohol.
• If resin has dried in the cup you used to mix it up in (only the residue left once you've poured it out), you can often flex the cup and simply peel off the cured resin.

Size(approx):
2 x 8oz cups : 6mm x 7mm
2 x 4oz cups: 8mm x 10.5mm

You can also clean these cups with our Alumilite Amazing Resin Remover.