Amazing Clear Cast Resin - our most popular all-rounder resin - easy-to-use epoxy resin which does a brilliant job both as a casting and a pouring/coating resin! Available in several sizes, from 235ml up to 7.5 litres.
A clear casting resin which works well for both thin coats and deeper casts. Using the Amazing Clear Cast Resin, only one product will allow you to create all sorts of projects; from coating paintings and filling bottle tops, to casting large bangles and paper weights.
Mixes in equal ratios (1:1 by volume) so very easy to measure up equal amounts of both parts.
Works perfectly with our resin moulds, with no release agent needed (however, release agents are a good way to extend the life of your mould). Can also be cast into plaster, aluminium, latex and urethane moulds if a mould making release (like Vaseline) is used.
Don't use water based dyes or colours with this resin. Our Alumilite Dyes are ideal (which come in a huge range of colours, including fluorescent neon colours!), as well as any dry colours. For gorgeous shimmers and high quality metal effects, use Mica Powder Pigments or the Alumilite Metal Powders. For a glow in the dark effect, use the Phosphorescent Powder!
Can be sanded, wet sanded, and/or buffed.
Amazing Clear Cast works best if cast in sections less than 3/8" thickness.
Available in the following sizes:
|3.75 litres||1 US gallon||4kg|
|7.5 litres||2 US gallon||8kg|
Volume/Weight comparison; the 940ml is 32 US fl.oz., this weighs approximately 1000 grammes.
Each kit consists of 2 bottles, for instance, the 32fl.oz kits comes as 1 x 16 fl.oz part A and 1 x 16 fl.oz part B, giving you a total of 32 fl.oz.
Mix ratio: 1:1 by volume
Work time: 45-50 min
Demould time: 18-24 hours. For deeper casts, allow 24-48 hours.
Please note: To help with thickness, keep the Alumilite Clear Cast at a minimum of 21°C or heat the thick side in a bowl of hot tap water for 30 minutes prior to use. The thicker ACC is poured, the cloudier it can be. For thicker castings, multiple pours of 6mm - 16mm approximately 4 hours apart is recommended.
TOP TIP FOR STORAGE: Keep the caps on each resin bottle sealed on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible.
Click here for an SDS for this product. Complies with FDA CFR 177.2600
Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.
GOOD NEWS - THIS RESIN CAN ALSO BE SHIPPED TO OUR EUROPEAN CUSTOMERS!
- Due to Brexit the following countries do NOT allow imports of this item:
First time using epoxy and this is easy to use and provides a lovely finish
Really easy to use and gives great colour separation
Fantastic value and really high quality product
Brilliant resin,I've tried 3 different ones,that didnt work for my projects, since I've found this one i wont use anything else, works perfectly
I love this resin. It is really easy to mix together, especially as this 1:1 ratio. Works wonderfully with mica powders and even paper flowers. Little to no odour. Bi will buy more
Excellent product ,using this in my latest youtube project
Iv used quite a few epoxies for top coats but this is right up there with the best, mix equal parts and mix well thats all there is to it, a warm environment will speed to drying process but its pretty straight forward to use.
Just starting out making and selling resin jewellery, this resin is great! It's super easy to mix and use and dries beautifully clear. I'd never used resin before but I've created some stunning pieces already!
I've been getting into resin work for the past few months. This is the kind of resin I've found works best for me! It's perfect for small scale projects such as jewellery. It dries very clear like glass and is pretty strong and durable. Definitely recommend!