phone: 01929 554 771


*Cactus Juice Stabilizing Resin - 3.79 Litres (1 US Gallon) - Revised Formula!

(Inc. VAT)
(Ex. VAT)
12 reviews Write a Review
Bulk Pricing:
Buy in bulk and save
  • Order by 1pm

  • Safe Payments

  • Amazing Selection

Cactus Juice - New Revised Formula!

Cactus Juice Stabilizing Resin is a premium, professional grade, heat-cured resin for stabilising and hardening wood and other porous material.

It's especially effective on those beautiful, spalted woods that are normally too soft to work with. Cactus Juice is easy to use and does not significantly change the colour of most woods.

Cactus Juice is not toxic, nor flammable, and it is not solvent based! It cures 99.99% from liquid to solid by weight; far superior to typical home stabilising solutions. 

This is not an entirely new formula, just a revised one that will mix absolutely fine with your existing Cactus Juice. It still has the same curing temperature and vacuum time as the previous version, but with great new benefits such as virtually no foaming, 15% less bleed out and is as clear as water! 


Cactus Juice is produced in Texas, USA, by Curtis O. Seebeck from Turntex Woodworks (if you have spent any time on wood-turning online forums you might know him as "MesquiteMan"). No, no cactuses were harmed in the manufacturing.

Cactus Juice will harden soft and spalty wood. Use it stabilise and harden wood - and other porous materials too.

You can add colour using the Cactus Juice Stabilizing Dyes with no risk of the dye affecting the resin.  *Please note with the revised formula, some settling may occur after mixing with the Bright Yellow, Coffee Brown and Lime Green Cactus Juice dyes.*

You can also use some of Alumilite Resin Dyes. Please note, not all Alumilite Dyes are suitable, only use the following with Cactus Juice: BlackBlueBrownGreenOcean BlueOrangeRedViolet and Yellow.

Cactus Juice must be used in a high quality vacuum chamber, sold separately here.

It is heat cured in an oven, at about 85°C-95°C. We recommend using a small convection oven. For health reasons, don't use your kitchen oven due to fumes.

Before purchase, please read the full instructions on how to use Cactus Juice here.

This size of Cactus Juice is shipped unactivated with the activator in a separate bottle. Activating is simple; just open the small bottle and add the contents into the large bottle. Replace the cap and shake well. If some of the activator particles do not dissolve, allow it to sit over night and shake again the next day. You must activate the entire bottle in one go. It is not recommended to activate portions of the bottle since it is difficult to properly proportion the activator. Once activated Cactus Juice has a shelf life of 8-12 months.

Approximately 3.79 Litres (1 US Gallon).
Also available in a smaller 1/2 US Gallon size here.

Quick Start Basics for Use
  1. Prepare blanks - sand, etc
  2. Place blanks in vacuum chamber and weight down
  3. Add Cactus Juice to completely cover blanks
  4. Apply full vacuum to chamber and keep your vacuum pump running until bubbles stop
  5. Release vacuum and soak blanks for at least twice as long as you had them under vacuum
  6. Remove blanks
  7. Wrap in foil
  8. Cure at 190-200° F (87-93° C) until Cactus Juice has solidified
  9. Remove foil
  10. Allow to cool to room temperature
  11. Store your excess Juice for the next use (DO NOT STORE IN AN AIR TIGHT GLASS JAR!)

Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.

Once activated, Cactus Juice must be kept below 29°C at all times otherwise it may cause rapid hardening. It is also recommended to keep the vacuum pump at least 1.5m (5’) away from the chamber when in use. Vacuum pumps operate at a high temperature and can contribute heat in a workspace. 

Click here for an SDS sheet for this product.

Who is TurnTex Woodworks? Curtis (TurnTex) is the leading authority and a pioneer in the field of stabilising and casting and has been at the forefront of this industry with the following innovations:

  • Cactus Juice Stabilizing Solutions - The first to offer affordable DIY stabilising resin and dedicated vacuum chambers for all types of stabilising needs.

  • Alumilite Casting Resin - The first to start using Alumilite Casting Resins for woodturning and helped make it a mainstream casting product.

  • Alumilite Clear Casting Resin - One of the most popular resins here at House of Resin, the Alumilite Casting Resin is based on Curtis's needs and feedback to the owner of The Alumilite Corporation. Curtis did all of the initial testing to develop the current product including testing 7 different versions until the properties that are important to woodworkers were achieved.

  • Worthless Wood - Otherwise commonly referred to as hybrid blanks, is the technique of combining casting wood and resin to form a unique, hybrid blank. This technique was originally created by Curtis in 2006 and shared with the woodturning community through an article he wrote called "Worthless Wood - Salvaging Otherwise Worthless Wood with Pressure Casting". This technique has been used by thousands of craftspeople around the world since that original article.

Due to Brexit the following countries do NOT allow imports of this item:

12 Reviews

  • 5

    Posted by Alexander Jack on 30th Jan 2022

    Top quality product, have been using this for years with no problem, also the supplier in the UK is trust worthy and ships very quickly. Thanks Sandy

  • 5
    Cactus juice

    Posted by Tracey hopper on 17th Jun 2021

    Fab stuff does exactly what it says it does can't be happier

  • 5
    Amazing quality

    Posted by adrian stewart on 26th Feb 2021

    Would always use this stuff

  • 5

    Posted by Richard Halstead on 1st Jan 2021

    Think it’s expensive but the results are worth it great product

  • 5
    Stabilising wood

    Posted by Michael Williams on 11th Nov 2020

    This stuff is as good as they say it is, but very expensive. I had 100mm x 440mm punky piece of wood and it soaked up a full one gallon container (over£100 worth). Still if it looks as good as I hope it will sort of be wort it.

  • 5
    Cactus juice

    Posted by Alexander Jack on 18th Sep 2020

    Excellent results using this product and house of resin never fail to deliver in good time. Great service 10/10 thanks

  • 5
    Cactus juice stabilising resin

    Posted by @shopdogworkshop on 7th Aug 2020

    If your going to stabilise any wood then it’s got to be cactus juice. If your going to buy cactus juice then the only place to get the best price and best service/delivery is the house of resin. First class all round. I wouldn’t shop anywhere else.

  • 4
    Cactus juice

    Posted by Jan-erik Lundgren on 16th Jul 2020

    Very good

  • 5

    Posted by stephen mcdowell on 16th Jun 2020

    Great results every time.