Premium quality clear polypropylene graduated mixing cups for resin, silicone, paint and more. The walls and rim of these cups are much thicker than our economy cup, making it more durable. Measure markings up to 300ml, maximum capacity to the rim is approx. 385ml.
These cups include handy measurements in millilitres, and ratios of 1:1, 2:1, 3:1, 4:1 and 5:1 to make your mixing quick and easy! They’re also printed back-to-front, so they’re readable from the inside - meaning no more bending down to make sure it’s level.
When you work with resin, exact measurements are really important, to ensure it sets properly. Use these cups to measure up exact amounts and to mix the resin. With the graduated printed scale on the outside, it is easy to get the right measurements.
Keep one "A" cup, one "B" cup, and one cup for mixing the two. If you're doing a large casting session you can then keep reusing the A and B cup for ages.
Depending on which resin you use, you can often clean out the cups for reusing, and you should be able to get quite a few pours out of each cup:
- Whilst the resin is still wet you can spray the cup with cooking oil spray, and wipe it clean with a paper towel. Then wipe of the residue with denatured alcohol.
- If resin has dried in the cup you used to mix it up in (only the residue left once you've poured it out), you can often flex the cup and simply peel off the cured resin.
Size: 81mm H x 88mm Top Diameter x 76mm Base Diameter
Available in quantities of 10, 20 and 40.
1 Review
-
Good measuring pots.
Really clear markings which make the measuring much easier. I managed to crack one when trying to remove set resin so possibly not quite as flexible as I would like.
