Padico Stand Jointer - Rotating and Fixed for displaying resin artwork.

These clear stands are great for displaying your resin artwork or for creating signs, name places, decorative items etc.

Rotating Stand:

To create the base you can use the Line Moulds and before pouring the resin, place the base part into the middle so that you can pour around it.

The stand part is to be placed at the bottom of the design you would like to display, with the pointy bit sticking downwards. For thicker pieces you can first cure a layer of resin, place the stand into the mould and then pour the rest of the resin. Once cured the design can be placed into the hole in the base.

Fixed Stand:

To create the base you can use the Line Moulds and before pouring the resin, place the base part into the middle so that you can pour around it.

The stand part is to be placed at the bottom of the design you would like to display, with the pointy bit sticking downwards. For thicker pieces you can first cure a layer of resin, place the stand into the mould and then pour the rest of the resin. Once cured the design can be placed into the slot in the base.

You can add more than one design to a base by adding more base parts before pouring the resin.

Each set contains 5 stands and base parts.