Walrus Cutting Board Oil

Walrus Oil Cutting Board Oil - show your wood some love

Did you know wooden cutting boards and butcher blocks are not meant to be disposable but can actually live as long as sea turtles? With proper design, finishing, and maintenance wooden cutting boards can be passed down through generations. And that's where Walrus Oil Cutting Board Oil and Wood Wax comes in.

Our Cutting Board Oil is 100% Food-Safe and free of toxins and synthetics, designed for new builds or for reconditioning. And finally a heavy-duty cutting board oil that doesn't require multiple coats! It will leave your board with a silky smooth finish, rich color, and a little shine. The perfect ratio of ingredients locks in the natural wood tones while repelling water and food particles when in use. And it only takes seconds to apply.

WALRUS CUTTING BOARD OIL
Walrus Oil is a proprietary wood finish recipe made up of Coconut Oil, Mineral Oil, Vitamin E, and Beeswax. It is FDA compliant for food contact surfaces such as cutting boards and butcher blocks. Walrus Oil is a liquid form and it won't solidify under normal conditions. It is highly shelf stable and has virtually no scent.

The Walrus Cutting Board Oil goes on smooth, not too thick and not too thin, and won't contaminate food with a strange taste. It will leave your board with a silky smooth finish, rich color, and a little shine. Use two coats for more depth and color.

• Semi-Gloss Finish
• For New or Restoration Projects
• Not Scented

Available in the following sizes

• 2 oz. sample pot
• 8 oz.
• 32 oz./946ml
• 128 oz.

Project Ideas:
Cutting Boards
Butcher Blocks
Charcuterie Boards
Bowls, Spoons, and Knives

For New Wood Projects
When using our Cutting Board Oil for new wood projects, be sure to sand at 320 to 600. To prevent raised grain, some woodworkers will do the sand-wet-sand method before sealing - meaning they'll sand the board, wet it, let it dry, and then do a final sand before applying a finish.

How to Maintain or Restore a Cutting Board
Cutting board maintenance and restoration is relatively simple. Clean the cutting board first with light soap and lukewarm water, then allow plenty of time to dry. If there are deep knife cuts or if any mold is visible, sanding the board down will be necessary using an electric orbit sander or planer if available. After sanding all surfaces simply apply a coat of our Cutting Board Oil and allow it to dry for 12 to 24 hours. Wipe away any excess oil after cure time.

Safe for Food-Contact Surfaces
Every product manufactured by Walrus Oil is 100% Food-Safe. All ingredients are considered GRAS (generally regarded as safe) by the FDA for food-contact surfaces. Our Cutting Board Oil can be used on kitchen butcher block counters, cutting boards, wood utensils, and even baby toys.

Using the Walrus Oil Cutting Board Oil with other brand products
Our Cutting Board Oil can be used in conjunction with most other oil-based finishes or epoxy and resins, such as when making a "river board" or when using wood pieces that have had cracks and holes filled with epoxy.

*No walrus harmed in the making of these products*