Alumilite Dye - Professional quality, highly concentrated dyes for resin.
Professional quality dye colours for resin - which can be opaque or transparent - you choose.
These vividly coloured liquid resin dyes are translucent when used in clear resin (like our Amazing Clear Cast), and opaque when used in white or coloured resins (like our Amazing Casting Resin). Alumilite Dyes are used with resin to give an even and complete colour, with a reacting pigment dye that will never leach.
Add the dye to the "A" side of the resin by weight up to 5% to achieve the colour and tint you desire. One drop goes fa-a-a-a-a-a-r! Really, trust us, try using less than you think you need. Use the smallest amount possible to get your desired colour.
As the dye is so concentrated, if you are working with smaller amounts of resin we recommend you add a speck of the dye to the tip a mixing stick, and stir this in, rather than dispensing from the bottle into the resin.
We carry ten basic colours, five fluorescent colours, and three skin tone colours (perfect for doll making or figure castings).
Supplied in plastic dropper bottle. Give the bottle a good shake before using.
- Black (Opaque)
- Ocean Blue
- White (Opaque)
- Beige* (Opaque)
- Dark Brown* (Opaque)
- Tan* (Opaque)
- Fluorescent Green (Opaque)
- Fluorescent Orange (Opaque)
- Fluorescent Pink
- Fluorescent Red (Opaque)
- Fluorescent Yellow (Opaque)
Also available as the following sets;
- Set of all 10 basic colours (this does not include the three skin tone colours) SAVE OVER 12%
- Set of all 15 basic colours including the flourescent colours (this does not include the three skin tone colours) SAVE OVER 12%
- Set of all 5 flourescent colours - SAVE OVER 10%
- Complete set of all 18 colours (including three skin tone and five fluorescent) - SAVE NEARLY 15%!
Skin colours: Beige, Dark Brown, Tan
Translucent colours include green**, yellow, red, blue, brown, orange, violet, and ocean blue.
Opaque colours: white, black, the three skin colours, and the five fluorescent colours. Some translucency can be achieved by adding an incredibly small amount of these dyes to clear resin. The opaque colours include fillers which may settle in the bottle. Give it a good shake or stir before using.
**Please note, occasionally, the Alumilite Dye Green is not compatible with epoxy chemistry and can shift to a blue colour. This is due in part to chemistry, but also shift in hues (yellowing) over time of epoxy, causing changes in colour.
Want to use with Cactus Juice?
The following colours of the Alumilite Dye range have been tested and can safely be used with Cactus Juice Stabilising Resin:
Black, Blue, Brown, Green, Ocean Blue, Orange, Red, Violet, Yellow
- Due to Brexit the following countries do NOT allow imports of this item:
- Norway, Switzerland, and all EU countries if not mentioned below.
- We can still ship this to:
- Cyprus, Malta, and Spain
- If your country is not listed above:
- Please email us to check.
This came in the starter set I ordered and I must say this stuff is great, the colour is so vibrant and I only used a small drop so a little goes a long way.
Same as review for the white dye a little goes a long way. Excellent product and will definitely be buying again.
Gives a beautiful colour in resin and goes an exremely long way. I've only marked it down because the packaging didn't sufficiently explain how to open the bottle and I ended up making a bit of a mess of it. Common sense I guess, but I could have done with some instruction
Fantastic colour great results only a drip needed added to my slowly growing collection many thanks .
Only used the Black up to now but 2 drops turned 1 and a half litres of clear very black so a little goes a long way. Does what it's supposed to do.
Very good, only a small amount needed, so it will last forever almost.
Great value for money