Water Slide Decors for Resin and More!

12 different waterslide decor sticker designs to choose from, all with a number of different designs per sheet.

To use:

Pour your resin into your mould, depending on how you want to add them to your piece you can either place them into your pour or allow the resin to go tacky and then place the decors onto your piece and coat with resin.
Cut out your decals using a pair of scissors.
Remove the plastic film from the decal then dunk it into a small bowl of room temperature water. Tweezers work well for this. Wait 20 seconds. The decal will now slide right off the paper backing.

4. Slowly lower the decal onto the resin and smooth out any bumps. Let it dry a little and then apply a top coat of resin. Or place it into the pour itself and position it with a pointed tool.

These quirky designs are ideal for adding to keyrings, jewellery, ornaments and much much more!

Each individual design vary from around 1cm to 1.5cm in length.

Design sheets available: