Blow torch for popping surface bubbles in resin
This blowtorch comes in stylish chrome, with a sturdy non-slip metal body, piezo trigger ignition, safety lock and detachable stand. It has a nice large flame, perfect for removing surface bubbles from resin as well as metal clay firing and light soldering.
This torch is easy to fill and easy to use, as it is self-igniting.
The torch has a flat base, so you can put it down safely if you need to take a short break in the firing.
Fill with standard aerosol butane gas lighter refill (which you can buy from most supermarkets, tobacconists, hardware stores and news agent). PLEASE NOTE: Butane gas is NOT the same as lighter fluid - you must make sure you use gas, not fluid.
We recommend you let the torch rest and cool off a little every 10 minutes of firing.
*Please note - You must direct the flame at a 45° angle. If you do not fire at the correct angle you can cause damage to the torch.*
Manufactured to British Standard BS EN ISO9994