Padico UV-LED crystal clear moon drop resin with a hard curing finish.

Ready to use acrylic UV/LED resin that cures in no time under a UV or LED lamp - no mixing required!

The low shrinkage (3.5%) resin has non-yellowing colour protection properties, keeping a crystal clear colour for longer. When using a silicone mould you won't see any wrinkles with this resin! Once cured, it has a hard and waterproof finish, with high transparency. This resin can be used to cast or coat items.

In a high wattage (36W and above) UV light box clear gel cures in only 2-4 minutes (we recommend curing deep items in thin layers at a time).

Works great in silicone and soft plastic moulds - with no stickiness after curing. Also works well with open back bezels. Use on its own, or embed items such as dried flowers, beads, and more! Easily coat or make fine lines with the nozzle attachments, available here.Padico UV Resin Nozzle Tips - 3pc

Curing time

● UV-LED light (6W-9W)　30-120 seconds
● UV light (36W) 　 2-4 minutes
● Bright sunlight　30-120 seconds
● Cloudy sunlight 　3-10 minutes

Be sure to expose light to top and bottom.

Please note

• Curing time differs with size, and will be longer when adding dyes. These are the manufacturer’s recommended timings, however we always recommend experimenting beforehand.
• The resin may cure in sunlight, so work in an area away from the sun.
• Keep lid on resin while not working, as it can begin to harden.
• All resin can eventually yellow over time.
• Store in cool and dry place out of sunlight, storage temperature 0℃ - 25℃. Use as soon as possible after opening.

Available in 30g, 100g. 200g and 500gm.

Made in Japan

Padico Nozzle Tip Attachments available here.Padico UV Resin Nozzle Tips - 3pc