Padico UV-LED that is fast curing and durable once cured.

Ready to use acrylic UV/LED resin that cures in no time under a UV or LED lamp - no mixing required!

This resin has reduced yellowing properties, keeping a clear colour for longer. When using a silicone mould you won't see any wrinkles with this resin! Once cured, it has a hard and waterproof finish, with high transparency. This resin can be used to cast or coat items.

In a high wattage (36W and above) UV light box clear gel cures in only 2-4 minutes (we recommend curing deep items in thin layers at a time).

Works great in silicone and soft plastic moulds - with no stickiness after curing. Also works well with open back bezels due to low heat shrinkage (4%). Use on its own, or embed items such as dried flowers, beads, and more! Easily coat or make fine lines with the nozzle attachments, available here.

Curing time

● UV-LED light (6W-9W)　30-120 seconds
● UV light (36W)　2-4 minutes
● Bright sunlight　30-120 seconds
● Cloudy sunlight　3-10 minutes

Be sure to expose light to top and bottom.

Please note

• Curing time differs with size, and will be longer when adding dyes. These are the manufacturer’s recommended timings, however we always recommend experimenting beforehand.
• The resin may cure in sunlight, so work in an area away from the sun.
• Keep lid on resin while not working, as it can begin to harden.
• All resin can eventually yellow over time.
• Store in cool and dry place out of sunlight, storage temperature 0℃ - 25℃. Use as soon as possible after opening.

Available in 30g, 100g, 200g and 500g.

Made in Japan

Padico Nozzle Tip Attachments available here.