NEW! Padico UV-LED resin for surface coating - Matte
Ready to use UV/LED resin that cures in no time under a UV or LED lamp - no mixing required! Perfect for coating your artwork of finished piece for extra protection.
The resin has non-yellowing colour protection properties. Once cured, it has a hard and waterproof finish, with a matte finish.
Low viscosity flowing resin with minimal odour compared to other resins. Quick curing that leaves no stickiness, brush marks blend in after being applied, it even works in detailed areas!
In a high wattage (36W and above) UV light box, clear gel cures in only 2-4 minutes.
This resin comes with 1 or 3 applicator brushes depending on the size you purchase. Easily coat or make fine lines with the nozzle attachments, available here.
Curing time
UV-LED light (6-10W, 405nm): 30 seconds - 2 minutes
UV light (36W, 365nm): 2 - 4 minutes
Please note
- Curing time differs with size, and will be longer when adding dyes. These are the manufacturer’s recommended timings, however we always recommend experimenting beforehand.
- The temperature of the resin increases whilst it cures, do not touch the piece until it has cooled down.
- The resin may cure in sunlight, so work in an area away from the sun.
- Keep lid on resin while not working, as it can begin to harden.
- All resin can eventually yellow over time.
- Store in cool and dry place out of sunlight, storage temperature 0℃ - 25℃. Use as soon as possible after opening.
Available in 10gm and 30gm.
Made in Japan
- Due to Brexit the following countries do NOT allow imports of this item:
- Spain
